Bucket attachment for HV und DS–round steel chains with sprockets RHV and plain segmented chain wheels, simple assembly and disassembly on the chain; pre-assembled halves BDD-S - ready for assembling on the chain - no additional attachment bolts - self-locking, two identical halves – forged with bolts and hardened highly wear resistant. Mounting dimensions of the BDD-S attachment correspond to the standard shackles, so all round steel and back mounted bucket attachments can be converted. Higher service safety because the BDD-S attachments don't have to transmit any chain pull.
Surface finish: natural black - waxed
Bucket attachment for HV and DS-round steel chains with sprockets RHV and plain segmented chain wheels, suitable for back mounted buckets, simple assembly and disassembling on the chain, two identical halves, completely forged incl. the bolts and heat treated. Mounting dimensions of the BDS-S and BDS attachments correspond to the standard shackles; existing chain end and shackle system can be converted. The same buckets and chain wheels can usually be used. Higher service safety because the BDS-S and BDS attachments don't have to transmit any chain pull. No wear part - can be reused.
Surface finish: natural black - waxed
Chain couplings for individual chain lengths HV and DS. The chain couplings have the same technological characteristics as the corresponding highly wear resistant chains. Pay attention that the couplings should be assembled and installed according to the instructions included in the packaging. These couplings can only be mounted as vertical links. Run as vertical links over sprockets, plain and grooved wheels.
Surface finish: shotblasted and waxed.
Connecting links for individual chain lengths HV and DS. The connecting links have the same technological characteristics as the corresponding highly wear resistant chains. Pay attention that the connecting links should be assembled and installed according to the instructions. These connecting links are mounted as vertical links in bucket elevators with back mounted buckets. For positive discharge bucket elevators the connecting links have to be installed as horizontal links
Surface finish: shotblasted and waxed.
Sprockets for use with HV and DSZ-round steel chains with replaceable and adjustable individual teeth, made from MnCr alloyed steel, case hardened - highly wear resistant. Sprockets are welded steel fabrications, any number of teeth or hub design is available. Keyways are machined in the hubs of matched wheels to ensure precise alignment of the teeth. Hub design, bore diameter and key size can be specified by the customer. Shimplates can be fitted to adapt the pitch circle dia. of the sprocket to a chain lengthened due to wear in the interlink points of contact. This ensures continued smooth running of the chain over the sprocket and the maximum use of the case hardened layer in the chain. Shimplates and new teeth can be mounted without disassembly the chain.
Plain segmented chain wheels for use with HV and DS-round steel chains resp. chain ends according to DIN 764 and DIN 766 for back mounted buckets.
Tail plain segmented chain wheels SEG-E with steel hub and cleaning slots, are welded steel fabrications, with replaceable, hardened segments - highly wear resistant, surface hardness min. 700 HV10. Bore diameter and key size as specified by the customer.
